Saracen 2019 Ariel LT MD Bike sample (used)
£4,999.99 £3,999.99 (Save 20%)

Saracen 2019 Ariel LT MD Bike sample (used)

£4,999.99 £3,999.99 (Save 20%)
SKU
RNA32117SP005
Size Guide
  • Available for Home Delivery

  • Unavailable for Click and Collect

2019 Saracen Ariel LT MD Ex Brand Sample Bike (Used)

    Using a 24T/40T/3K Toray UD Carbon blend on the front triangle and a Toray UD Carbon swingarm keeps weight low whilst not compromising on durability. As seen on the Myst, the custom headtube allows you to adjust the front centre +/-5mm in order to perfect your ride position. Internal cable routing and a specific Di2 battery holder in the downtube keep the bike looking as fresh as possible whilst still being practical. Full Shimano 1 x 11 speed groupset with M8000 XT brakes taking care of stopping duties. DT Swiss E1900 wheelset wrapped in Maxxis Minion DHR II tyres really finishes off this killer build!

Bike History: This is an ex brand sample bike that has been part of the Saracen brand teams sample stock.

Damage: There is no damage to this bike. Please see details for more information.

Additional information: The Fox Float X2 shock has been replaced for an aftermarket version with different decal colours.

Specification

PartComponent Details FrameSaracen Ariel LT Frame Ariel LT Medium Frame. Made from a 24T/40T/3K Toray unidirectional carbon blend with a custom headtube that allows an adjustable front centre, plus or minus 5mm which allows the rider to get the perfect reach. The main pivot bearing takes a 37mm bearing with the linakge bearings taking a 28mm bearing. Designed with Saracens signiture TRL suspension design and a carbon linkage allowing a 230 x 60mm rear shock and 165mm of travel. Internal cabling keeps the frame sleek and uncluttered whilst the boost dropout system is compatible with 12 x 148mm Thru axles. ForkFox 36 Float Factory ForkFront suspension duties are carried out by the Fox 36 Float Factory Fork. Kashima coating and the FIT GRIP2 damper gives the rider race winning performance and an ultra smooth feel throughout the 170mm of travel. 4 way high and low speed compression give plenty of oppertunity for adjsutment. This fork is has a tapered steerer and is desinged to to take a 15x110 Boost thru Axle.ShockFox Float X2 Factory ShockRear suspension is taken care of by the award and race winning Fox Float X2 Factory shock. Kasima coating and the EVOL damper mean you get a smooth feel throughout the 165mm of travel. 2 position adjustment allows you to ride the shock open or firm for climbing or descending. There is an additional 8 clicks of high speed and 16 clicks of low speed adjustment. Headset UpperRNS5260The frame takes a Saracen custom offset headset and comes with options for a 0, +/- 5mm offeset. Headset LowerRNS5260The frame takes a Saracen custom offset headset and comes with options for a 0, +/- 5mm offeset. Seat Post ClampRNS5248The frame comes equipped with our Saracen branded 34.9mm seat clamp.Seat PostX Fusion Manic A 30.9mm, X Fusion Manic dropper seat post allows the rider to get the saddle out the way quickly and easily whilst internal cable routing keeps the frame looking sleek. This frames seatpost has a 150mm of travel. Saddle RNS5009Fitted with a custom Saracen branded saddle a rider can expect a comfotable ride no matter how long they are on the bike. StemSaracen Custom StemThe 45mm, 0 degree rise, A-head stem with a 31.8mm clamp is a Saracen OE part that has been CNC machined from a 6061 alloy. Handle BarRaceface Atlas Bars785mm wide Raceface Atlas handlebars with a 12.7mm rise, 4 degree up bend and 8 degree back bend complete the cockpit set up.GripsRNS5140Saracen branded, lock on grips that have been designed to absorb ride vibrations and help ensure a secure grip.Front WheelDT Swiss E1900"EWS proven design and quality in a fantastic value package, the E 1900s offer a tough all round wheel for the masses, perfect for smashing out laps of Bike Park Wales every weekend. As you'd expect the E (Enduro) version of these wheels uses a super strong, 30 mm internal, 35 mm external width sleeved rim for maximum support when running wide tyres at low pressures. The sleeved rim is significantly stiffer than the pinned versions found on most whels at the price point and helps keep the weight down despite the added width. With an average weight per pair of 1998 grams for this 27.5"" wheelset may be tough but they're not going to hold you back on the transitions. The custom designed straight pull centre lock hubs share many of the features found in DT's top-end wheelsets and offer load optimised spoke beds to ensure perfect alignment and maximum rigidity. As one of the few manufacturers of hubs, rims and spokes, the 1900's hubs and rims are designed from the ground up for DT's straight pull, Champion spokes. Sealed cartridge bearings and easily serviceable pawl drive rear hub provide low maintenance with simple bearing replacement if required.Maximum recommended system weight: 130 KG"Rear WheelDT Swiss E1900"EWS proven design and quality in a fantastic value package, the E 1900s offer a tough all round wheel for the masses, perfect for smashing out laps of Bike Park Wales every weekend. As you'd expect the E (Enduro) version of these wheels uses a super strong, 30 mm internal, 35 mm external width sleeved rim for maximum support when running wide tyres at low pressures. The sleeved rim is significantly stiffer than the pinned versions found on most whels at the price point and helps keep the weight down despite the added width. With an average weight per pair of 1998 grams for this 27.5"" wheelset may be tough but they're not going to hold you back on the transitions. The custom designed straight pull centre lock hubs share many of the features found in DT's top-end wheelsets and offer load optimised spoke beds to ensure perfect alignment and maximum rigidity. As one of the few manufacturers of hubs, rims and spokes, the 1900's hubs and rims are designed from the ground up for DT's straight pull, Champion spokes. Sealed cartridge bearings and easily serviceable pawl drive rear hub provide low maintenance with simple bearing replacement if required.Maximum recommended system weight: 130 KG"Tires (Front)Maxxis Minion DHR IIProven paddle knobs down the centre not only provide decreased rolling resistance compared to the DHF but also offer increased braking when the trail gets loose. You may not notice it outside of the steepest terrain but those knobs allow you to brake harder in the rear to maintain your balance as you let the high volume casing absorb any trail irregularities.Tires (Rear)Maxxis Minion DHR IIProven paddle knobs down the centre not only provide decreased rolling resistance compared to the DHF but also offer increased braking when the trail gets loose. You may not notice it outside of the steepest terrain but those knobs allow you to brake harder in the rear to maintain your balance as you let the high volume casing absorb any trail irregularities.CassetteCSM7000146 "Equipped with a Shimano SLX M7000 11 speed cassette with a ratio of 11-46T. The M7000 11-Speed cassette features a light weight, minimal design sprocket carrier.The Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load. Close ratio gearing allows a more efficient use of energy through finer cadence control. Sprockets are cut away and drilled to reduce weight without reducing rigidity."ChainKMC X11The KMC X11 chain has an asymmetrical chamfering which avoids interference. It also has additional chamfering for smooth opertaion and impeccable precision when shifting. Rear MechRDM8000Shimano's Direct Mount compatible Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axel sizes and move suspension pivots. Direct Mount gives a simpler, cleaner look. Deore XT Shadow+ Dyna-Sys11 11-speed rear derailleur delivers reliable and precise shifting with a stiff and lightweight open design. Shadow+ features a super low profile design that reduces the risk of damage from trail side hazards. The shadow plus chain stabilizer tension can easily be adjusted externally via a hex key. Shadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shifting. This can be switched off to remove the wheelShadow design slant angle has been optimized for use with 40-46T sprockets. Direct cable routing prevents snagging from any trail side hazards. Four fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trails. High rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shift. It has a Strong return spring for a positive shifting feel. Durable sealed bearing pulleys.Front Mech --BBBBMT800BEquipped with a Shimano BB-MT800B bottom bracket. Crankset FCM8000A high performance crankset from the classic MTB group. Forged HollowTech II aluminium cranks offer unrivalled strength-to-weight ratio. Lightweight construction for external super smooth bottom bracket bearings. Stiffness and strength increased with advanced design due to wider spaced bearings and oversized axle. 70 degree spider arm for optimal rigidity.Chain Rings SM-CRM8032T Shimano XT chainring LH ShifterX Fusion Dropper LeverIncluded with seat post - Pro Dropper lever RH ShifterSLM7000RShifting responsibilities are handled by the Shimano SLX M7000 Rapidfire Plus 1 x 11speed shifter.Pedals--F/BrakeM8000Powerful, modulated braking is guarenteed with the Shimano XT M8000 brakeset complite with 180mm rotors. R/Brake M8000Powerful, modulated braking is guarenteed with the Shimano XT M8000 brakeset complite with 180mm rotors.

Bike Purchases

 

Home Delivery

Get your bicycle delivered to your door for FREE.

How it works:

  • Order your bike online.

  • An experienced and certified mechanic will build and complete a pre-delivery inspection.

  • Your bike will arrive at your delivery address between 5 – 7 working days via TNT.

  • You can track your bike order here.

  • Follow the instructions provided to adjust your handlebars and fit your pedals (if applicable).

  • Bicycles are shipped from a different warehouse to other items so may arrive seperatley to other items ordered.

 

Click & Collect

Have your bicycle ready to collect in-store for FREE.

How it works:

  • Order your bike online and select your preferred shop for collection.

  • An experienced and certified mechanic will build and complete a pre-delivery inspection.

  • The selected store will contact you to confirm your bicycle is ready for collection.

  • Please bring a form of ID with you and your Freewheel order number.

  • To avoid disappointment, please wait until you have heard from your selected store prior to travelling.

 

Returns

If you would like to return a bike that has not been used or ridden and the order was placed within the last 28 days, please contact us with the following details to arrange a collection:

  • Your full name and collection address

  • Your order number

  • Your preferred date of collection (Monday to Friday only)

  • A contact number for the courier driver

All bicycles must be returned in the condition they were received and packaged in the original box. If you no-longer have the original box, please let us know and we can provide one at a cost of £25.

Unfortunately, we are unable to accept bikes back that have already been ridden. If you find a fault with your new bike you should contact us and we will direct you to your local Freewheel store who will be able to assist you.

Full Specifications